Best Polishing Compound After Wet Sanding
The Best Best Polishing Compound After Wet Sanding References. Wet sanding should always be followed by compounding and polishing because it leaves a hazy surface. I get a good finish using a.
Professional wet/dry sanding and polishing tutorial. I get a good finish using a. However, you still might be able to notice some swirls when the sunlight hits the surface.
Joined Nov 25, 2007 Messages 862.
But it did not get rid of the. Start with 400 and use a rubber sanding block or a cork block. That’s a safe start and is unlikely to cut through the clear.
As Rubbing Compounds Are Quite Aggressive, They Can Be Purchased In Varying Degrees, From 1000 Grit To 5000 Grit.
The first two types only penetrate the clear coat, and sanding can fix them. Comparison chart for best compound after wet sanding. Check the results, go from there.
600 Grit Wet Is Very Efficient At Getting It Flat, But Be Careful To Ensure You Stop Sanding As Soon As It Is Flat When You Squeegee The Surface.
These different grits handle the different depths of paint scratches. Professional wet/dry sanding and polishing tutorial. It acts one part as a cleaner and.
Should I Wet Sand Before Polishing?
If you are up for some financial investment try a microfiber polishing pad, with a heavy cutting compound. 4 chemical guys optical grade polish. I then go to 1500 and up, but once.
What Polish After Wet Sanding.
Clean the metal surface thoroughly using soap and water or an abrasive cleaner like bar keepers friend. I get a good finish using a. There are three basic steps for polishing metal:
Post a Comment for "Best Polishing Compound After Wet Sanding"